Pressure Sensor 31CP52-01 80100-1207360E6R for Yuchai Engine

Product Details

Pressure Sensor 31CP52-01 80100-1207360E6R – Direct Replacement for Yuchai Engine

Product Overview

This heavy-duty pressure sensor is engineered as a direct OEM-equivalent replacement for Yuchai diesel engine systems. Designed for high-accuracy pressure monitoring in fuel rails, common-rail injection systems, and hydraulic circuits, the 31CP52-01 80100-1207360E6R ensures stable signal output under extreme vibration, temperature fluctuation, and pressure spikes.

Built with a stainless-steel sensing element and robust polymer housing, this sensor meets original equipment fit, form, and function requirements. It is ideal for fleet maintenance, engine rebuilds, and aftermarket service kits.

Key Benefits

Plug-and-play compatibility with Yuchai engine harnesses (no adapter required)
Wide operating range – supports pressures from 0 to 52 MPa absolute
Fast response time (< 2 ms) for real-time ECU closed-loop control
High overpressure tolerance – withstands up to 2× rated range without damage
Temperature compensated from –40°C to +125°C for global climate reliability

Technical Specifications (Detailed)

Electrical Characteristics

Parameter	Value
Supply Voltage	5.0 V DC ± 0.25 V
Output Signal	0.5 – 4.5 V ratiometric (linear)
Load Impedance	≥ 10 kΩ (pull-up recommended)
Current Consumption	≤ 15 mA (at 5 V, no load)
Output Short Protection	Yes (continuous to ground or supply)

H3: Pressure Ratings

Parameter	Value
Pressure Range	0 – 52 MPa absolute
Overpressure Limit	104 MPa (2× rated)
Burst Pressure	≥ 156 MPa
Accuracy (total error band)	± 1.0 % FS at 25°C
Accuracy (full temp range)	± 2.5 % FS (–40°C to +125°C)
Long-term Drift	< ± 0.5 % FS / year

Mechanical & Environmental

Parameter	Value
Thread Type	M12 × 1.25 – 6H (ISO standard)
Sealing	O-ring (NBR, included)
Housing Material	PBT + GF30 (glass-reinforced)
Diaphragm Material	Stainless steel 17-4PH
Connector Type	3-pin AMP / TE (mate with 1-967616-1)
Ingress Protection	IP67 (mated)
Operating Temperature	–40°C to +125°C
Storage Temperature	–40°C to +130°C
Vibration Resistance	20 g (10 – 2000 Hz, 3 axes)
Shock Resistance	100 g (6 ms half-sine)

Calibration & Output Mapping

Output voltage at 0 MPa: 0.50 V ± 0.05 V
Output voltage at 52 MPa: 4.50 V ± 0.05 V
Transfer function: V_out = 0.5 + (Pressure × 0.0769) (Pressure in MPa)
Factory calibrated and traceable to NIST standards

Compatibility & Cross-Reference

Direct Fit Applications

Yuchai YC6A / YC6L / YC6MK / YC6T series (Euro II – Euro V)
Yuchai marine and stationary generator engines with common-rail systems

OEM Cross-Reference Numbers

80100-1207360E6R (Yuchai original)
31CP52-01 (Sensata / Kavlico equivalent)
Replaces: YC-3100-52A, 430711-0010, 8900-1025

Installation Guidelines (for technicians)

Always disconnect the battery before replacing the sensor.
Clean the mounting port thoroughly – debris can damage the diaphragm.
Apply light grease to the new O-ring (not included in all packaging).
Torque the sensor to 25–30 N·m – overtightening may distort the thread.
Reconnect the 3-pin connector until you hear a positive click.
Perform a key-on/engine-off voltage check – expect 0.5 V (no pressure).
Start engine and monitor live data for linear pressure increase with RPM.

Ordering & Packaging Information

Part Number as ordered: 31CP52-01-80100-1207360E6R
Packaging: Individual anti-static bag + foam-lined carton
MOQ: 1 piece (stock available)

Reviews