Foot Step for Zoomlion ZTC25 – OEM Replacement Access Step

Foot Step for Zoomlion ZTC25 Mobile Truck Crane

This foot step is a precision-engineered replacement component specifically designed for the Zoomlion ZTC25 mobile truck crane. It functions as the primary access step for operators entering the cab and for maintenance personnel performing daily inspections around the crane chassis. Manufactured to match original equipment specifications, this step ensures seamless integration with the existing mounting brackets, eliminating the need for drilling, welding, or adapter plates.

Built for heavy-duty construction environments, this foot step resists impact, corrosion, and constant foot traffic. Its anti-slip surface provides consistent traction even in wet, muddy, or oily job-site conditions, enhancing operator safety and reducing the risk of slips and falls during crane operations.

Compatibility & Installation Notes

• Direct replacement for OEM Zoomlion part numbers 6010-01258 and 6010-01259 (left and right sides) – verify against your existing step.

• Fits both cab-side and chassis-side mounting positions – identical part for left and right access.

• No chassis modifications required – uses factory threaded inserts.

• Recommended to inspect the rubber isolation grommets (if your ZTC25 has them) and replace if cracked – available in our mounting hardware category.

• Torque all four bolts evenly in a cross-pattern to prevent step distortion.

Why Choose This Foot Step Over Generic Alternatives?

• Factory-matched geometry – generic universal steps often have incorrect bolt spacing (120 x 80 mm is ZTC25-specific), requiring additional brackets or holes.

• Superior zinc coating thickness – many aftermarket steps use only 80–100 g/m² zinc, which fails within 12 months in coastal environments. Our 275 g/m² coating lasts 3–5 years.

• Tested to crane-specific dynamic loads – not just static weight rating; we simulate 50,000 entry/exit cycles with a 180 kg load to verify fatigue resistance.

• Non-slip pattern optimized for steel-toe boots – the chevron ribs are spaced at 12 mm intervals, matching the tread pattern of standard construction footwear for maximum surface contact.

• 12-month warranty against manufacturing defects, with a 30-day fitment guarantee – if it does not bolt up, we accept returns.